Showing posts with label dry brushing. Show all posts
Showing posts with label dry brushing. Show all posts

Friday, July 29, 2011

Dwarf bagpiper painted

Finally worked on the dwarf bagpiper I got from Reaper. I enjoyed the sculpting but the drag is it is way bigger then the 28mm that I'm painting. I wanted to draft him into my Celtos warband for the Gaels/Irish don't have a piper, and why is a big oversight for the Gaels three instruments are the bodhran (small hand drum), harp, and the bagpipe.
     In the future my plans are to make Clare's Regiment (Wild Geese) in the Service of France. This infamous company had three generations of the O'Brien family as its commanders. A big problem is cannibalizing some figures to make a piper, for the Irish Brigade went into battle under the skirl of the bagpipes.
     My biggest problem in painting are the eyes. I just can't do the eyes yet. Read on one blog about using an artist mechanical pen to make the eyes. There isn't an art or drafting store nearby so I got an extra fine at Staples. Although one can make a small dot the blogger didn't mention the problems some figures might have with sunken eyes so the pen hits above & below the eye socket.
As for this figure, it shall just sit on my desktop computer tower.



Well my painting is getting better! Several visitors tipped the following:
  • to dilute the paint.
  • Layer with washes starting with darkest color and going lighter each wash. (Tried this and it worked very well, but . . . I don't have a wide variety of paint colors and this limits things. Yes I've tried using black and white to dilute the colors, and just not having a good experience with this.)
  • Dry brushing is getting better, SOMETIMES, such as with the piper's cape & hair.
Painted the bagpipe to look like mine, where the white is bagpipes used to use ivory. Today, such as mine, imitation ivory plastic is used since to use and have ivory now is illegal. Those who are really good piper's, have sterling silver replacing the ivory. Just noticed a small glitch which I shall correct. Forgot to paint black holes a top the pipe's. (The poor piper is going to huff & puff with no sound [although some would appreciate this lack of musical sound].)

Tuesday, July 12, 2011

Painting: round two

I've painted a new set of Irish miniatures for my village.  Did a little better on dry brushing, and one comment was that the flesh tone wasn't right and to try wet-washing with some brown, which I did and it does seem better. However, my eyes still are very bad.

Sunday, June 5, 2011

How to: Step 3 - Painting

After priming the 28mm miniature, letting it thoroughly dry, the next step is painting. Don't buy cheap brushes. Some folks use nylon but it appears for most people the nylon bristles are to stiff. Try to get red sable hair brushes. Use only the tips for painting & don't let the paint get more then halfway up the bristles. Clean the brush in water often while painting. When finished rinse the brush in luke-warm water with soap. Remold the brushes bristles in your finger tips.

Use small red sable hair brush
 Base coat

There are several ways to do the base coat:
1)  Paint the entire figure in black/dark brown. Then layer the chosen color from dark to light.
2)  After painting entire figure wash each area with darkest color.
3)  Base paint in dark color chosen, then layer the highlight areas with a shade lighter, then lighter a second time.

If one only has the base color of paints, use white and black paint to get the shade of color desired. Problem with this is making sure one has mixed enough paint for the project.





 
In hind sight I should have painted the small inner areas first & the little details. It is okay to splash paint beyond your target area. Later when painting that area it will be corrected. If one needs to remove extra paint use a cotton swab. Don't apply the paint in streaming amounts, over painting will clog up the fine details. As for painting highlights, chose the areas where the sun light would hit if shining straight down. To help in this place a light overhead and see where light strikes the figure.

I was going to paint a hem pattern on the bottom of the figure holding the sword, and on the sword scabbard, but with out a magnifier, forget it.





 
Figure brushed in black wet wash
 Wet Wash

The step after base painting and painting highlights is a technique called wet washing. Take the dark base color and dilute it down with water 2 parts water to 1 part paint (this is trial & error, perhaps more dilution is wanted, experiment). Another way of wet washing is dipping the tip in black paint then dip it into water, then run the brush over the figure with the wash. Either way chosen, layer the washes.

Theory is that the dark wash with run into the lines and crevasses and make them dark giving better shading to the figure. I tried the black wash style and did not like the results. To me all it did was mute the colors and make the flesh area grey looking. I went back and touched up the flesh colored areas (notice figure at left has no eyes) My understanding is this takes practice by doing it and modifying to one's own style. I have a lot of practice!


  Dry brushing/washing

Dry brushing, didn't work to well
The second to last step is called dry brushing/washing. This is taking a dry brush dipping in lighter paint or just white, then wiping most of the paint off the bristles, then quickly flick the brush over the highlight areas. Again this is to help in shading. It appears to me that I need to practice this a lot too!

My first figure painted isn't to bad considering I did this without a magnifier, which I highly recommend! In my old age the eye Doc gave me bi-focal eye glasses, which I hate to wear, and usually don't. My vision is still 20/25 without them. I also wish the colors were brighter, and the washing both wet & dry need a lot of work. Oh yes. The eyes, mine suck because I needed a magnifier, and a hand hold one won't do! Also finish the base off. I haven't done this cause I'm still trying to figure out bases, which shall be my next post.

The final step is using a sealer, most folks use a spray matte finish. The sealer protects the paint job. Matte is preferred cause it looks natural, where gloss does not.

Thanks to Ray and Paul for their help. I'll keep posting my learning how to paint and we shall all see if I improve.